Fixed Gas Detection
Features
- Available gases include
- LEL, H2S, CO, & CO2
- Toxic sensors include NH3, AsH3, Cl2, ClO2, HCN, & SO2
- Infrared sensors for combustibles and CO2
- Patented water repellent sensor coating
- Explosion proof construction
- Optional stainless steel junction box
Description
The RKI Direct Connect series gas sensors are highly reliable and very cost effective for the detection of common gas hazards. The direct connect series are available for LEL, H2 Specific LEL, LEL IR, Oxygen, H2S, CO, CO2, and for a variety of toxic gases. The sensors for LEL, H2, Oxygen, H2S, CO2, and Carbon Monoxide are explosion-proof with flame arrestors, and approved for use in hazardous areas (Class 1, Div. 1 Groups B, C, D). An optional non-explosion proof version is available for oxygen, H2S, CO, and CO2 for use in Class 1 Div 2.
The Direct Connect sensors can be used in two different ways. The sensors can be mounted directly to the controllers as a complete stand alone system, or they can be mounted to explosion proof junction boxes for remote detection.
The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors are available for NH3, AsH3, Cl2, ClO2, HCN, PH3, and SO2.
The Direct Connect sensors can be used either indoors or outdoors. The flame arrestors for the explosion-proof versions utilize a patented coating which make them water repellent. Also, splash guards are available for use in very wet environments. An optional stainless steel junction box is available for corrosive environments.
All of the Direct Connect sensors are designed to specifically interface with RKI Beacon 110, 200, and 410A controllers.
Specifications
Explosion Proof Class I, Div. 2 , Groups B, C, D |
|||||||||
|
LEL General Purpose |
LEL H2 Specific |
O2 Oxygen |
H2S Hydrogen Sulfide |
CO Carbon Monoxide |
CH4 Methane IR |
HC Hydrocarbons IR |
CO2 Carbon Dioxide IR |
||
| Sensor With J-Box |
61-1000RK (UL) | 61-1001RK (UL) | 65-2515RK | 65-2427RK-05 | 65-2437RK-05 | 61-1003RK-CH4 61-1006RK-CH4 |
61-1003RK-HC | 61-1004RK-02 61-1004RK-03 61-1004RK-05 61-1004RK-10 |
|
| 61-1000RK-05 (CSA) | 61-1001RK-05 (CSA) | ||||||||
| Sensors | Catalytic | Galvanic cell | Electrochemical | Infrared | |||||
| Sensor Only |
61-0140RK (UL) 61-0140RK-05 (CSA) |
LEL H2 – NC-6205-01 (UL) NC-6205-05 (CSA) |
65-2514RK | 65-2428 | 65-2438 | 61-0190RK-CH4 61-0192RK-CH4 |
61-0190RK-HC | 61-0191RK-02 61-0191RK-03 61-0191RK-05 61-0191RK-10 |
|
| Measuring Range | 0-100% LEL | 0-25% Vol. | 0-100 ppm | 0-300 ppm | 0-100% LEL 0-100% Vol. |
0-100% LEL | -02 -03 -05 -10 |
0 – 5000ppm 0 – 5.0%Vol. 0 – 50%Vol. 0 – 100%Vol. |
|
| Lower Detectable Limit (LDL) | 2% of full scale | 0.1% Vol. | 2% of full scale | ||||||
| Response Time (T-90) |
LEL – 30 Seconds | LEL H2 – 20 Seconds | 90 Seconds | 60 Seconds | 90 Seconds | 30 Seconds | 30 Seconds | 30 Seconds | |
| Accuracy | +/- 5% of full scale (0.5% volume for oxygen) | ||||||||
|
Life
Expectancy |
2 to 3 years with normal service | 3 to 5 years with normal service | 2 to 3 years with normal service | 5 years plus with normal service | |||||
| Operating Environment | |||||||||
| Location | Indoor or outdoor. Explosion proof for Class I, Groups B, C, and D atmospheres. | ||||||||
| Temperature | -40°F to 167°F -40°C to 75°C |
-4°F to 113°F -20°C to 45°C |
-40°F to 104°F -40°C to 40°C |
23°F to 104°F -5°C to 40°C |
-40°F to 122°F -40°C to 50°C |
||||
| Humidity | 0 – 99% RH non condensing | ||||||||
| Housing | |||||||||
| Housing J-Box | Cast aluminum, explosion-proof. Optional stainless steel J-box available. | ||||||||
| Sensor | Stainless steel, explosion-proof | ||||||||
| Approvals | 61-1000RK UL | 61-1001RK UL | CSA NRTL | C UL US | |||||
| 61-1000RK-05 CSA | 61-1001RK-05 CSA | ||||||||
| Controllers | Compatible with the following controllers: Beacon 110, Beacon 200, and Beacon 410A | ||||||||
| Warranty | One year materials and workmanship | ||||||||
Toxic Gas Transmitters Class I, Div. 2 |
|||||
| O2 Oxygen |
H2S Hydrogen Sulfide |
CO Carbon Monoxide |
Toxics | CO2 Carbon Dioxide |
|
| Sensor With J-Box | 65-2497RK *65-2502RK |
65-2498RK | 65-2499RK | See Chart Below | 61-1007RK-02 61-1007RK-03 61-1007RK-05 61-1007RK-10 |
| Sensors | Galvanic cell | Electrochemical | Infrared | ||
| Sensor Only | 65-2494RK
*65-2510RK |
65-2495RK | 65-2496RK | See Chart Below | 61-0198RK-02 61-0198RK-03 61-0198RK-05 61-0198RK-10 |
| Measuring Range | 0-25% Vol. | 0-100 ppm | 0-300 ppm | 0 – 5000ppm 0 – 5.0%Vol. 0 – 50%Vol. 0 – 100%Vol. |
|
| Lower Detectable Limit (LDL) | 0.1% Vol. | 2% of full scale | |||
| Response Time (T-90) | 20 seconds or less | 35 seconds or less | 60 seconds or less | 30 seconds or less | |
| Accuracy | +/- 5% of full scale (0.5% volume for oxygen) | ||||
| Life Expectancy | 2 years withnormal service | 2 to 3 years with normal service | 5 years plus with normal service |
||
| Operating Environment | |||||
| Location | Indoor or outdoor, Class I, Div. 2 | ||||
| Temperature | -4°F to 122°F -20°C to 50°C |
14°F to 104°F -10°C to 40°C |
-40°F to 122°F -40°C to 50°C |
||
| Humidity | 0 – 99% RH non condensing | ||||
| Housing | |||||
| Housing J-Box | Cast aluminum, explosion-proof | ||||
| Sensor | Aluminum | ||||
| Controllers | Compatible with the following controllers: Beacon 110, Beacon 200, and Beacon 410A | ||||
| Warranty | One year materials and workmanship | ||||
 |
Toxic Direct Connect Sensor Ordering Information |
|||||
| Part Number With J-Box | Part Number Without J-box | Gas | Range | Resolution | Sensor type | |
| 65-2301RK-NH3 | 65-2300RK-NH3 | Ammonia (NH3)* | 0 – 75.0 ppm | 0.1 ppm | ESM -01 | |
| 65-2303-NH3-75 | 65-2302-NH3-75 | Ammonia (NH3) | 0 – 75.0 ppm | 0.1 ppm | CT-7 | |
| 65-2303-NH3-1 | 65-2302-NH3-1 | Ammonia (NH3) | 0 – 100 ppm | 1 ppm | CT-7 | |
| 65-2303-NH3-2 | 65-2302-NH3-2 | Ammonia (NH3) | 0 – 200 ppm | 1 ppm | CT-7 | |
| 65-2303-NH3-5 | 65-2302-NH3-5 | Ammonia (NH3) | 0 – 500 ppm | 1 ppm | CT-7 | |
| 65-2301RK-AsH3 | 65-2300RK-AsH3 | Arsine (AsH3) | 0 – 1.50 ppm | 0.01 ppm | ESM -01 | |
| 65-2303-CL2-3 | 65-2302-CL2-3 | Chlorine (Cl2) | 0 – 3.00 ppm | 0.01 ppm | CT-7 | |
| 65-2303-CL2-10 | 65-2302-CL2-10 | Chlorine (Cl2) | 0 – 10.0 ppm | 0.1 ppm | CT-7 | |
| 65-2303-CLO2-1 | 65-2302-CLO2-1 | Chlorine Dioxide (ClO2) | 0 – 1.00 ppm | 0.01 ppm | CT-7 | |
| 65-2303-CLO2-3 | 65-2302-CLO2-3 | Chlorine Dioxide (ClO2) | 0 – 3.00 ppm | 0.01 ppm | CT-7 | |
| 65-2303-CLO2-5 | 65-2302-CLO2-5 | Chlorine Dioxide (ClO2) | 0 – 5.00 ppm | 0.01 ppm | CT-7 | |
| 65-2301RK-HCN | 65-2300RK-HCN | Hydrogen Cyanide (HCN) | 0 – 15.0 ppm | 0.1 ppm | ESM -01 | |
| 65-2301RK-PH3 | 65-2300RK-PH3 | Phosphine (PH3) | 0 – 1.00 ppm | 0.01 ppm | ESM -01 | |
| 65-2301RK-SO2 | 65-2300RK-SO2 | Sulfur Dioxide (SO2) | 0 – 6.00 ppm | 0.01 ppm | ESM -01 | |
| * Sensor being phased out, use CT-7 type when possible. | ||||||
Direct Connect Wiring Matrix |
||
| Sensor | Number of Wires to Controller | Maximum Distance to Controller |
| 18 AWG wire min. | ||
| LEL / CO2 / IR | 4 | 500 ft. |
| Oxygen | 2 | 500 ft. |
| H2S | 2 | 500 ft. |
| CO | 2 | 500 ft. |
| Toxics | 2 | 500 ft. |
Specifications subject to change without notice.
Made in the USA
Availability: Manufacturer Sourced. Usually available/ships in 3-7 Days.