The Safety Standard • Russmill Safety
Concentrated cleaners are standard in Bahamian workshops, hotels, marinas and plants, but mixing is where things go wrong: a mix that is too strong, a bottle with no label, or two products combined "to work faster". Treat dilution as a safety control.
Why dilution is a safety step
The Health and Safety at Work Act, Chapter 321C, Section 4(2), requires employers, so far as is reasonably practicable, to provide safe systems of work, safe arrangements for handling and storing substances, and the instruction and training that make both work. A written, repeatable mixing routine covers all three.
Simple Green's article How Concentrated Cleaners Save Money notes that an over-strong solution can strip floor finishes, damage paint or corrode some materials, and can expose workers to unnecessary fumes or residue, while an over-weak one leaves soil behind and guessing gives uneven results. An unlabeled bottle adds another risk: the next person cannot know what is inside.
Start with the label for that product
Ratios are product-specific, and the current label and SDS for the product in your hand always override any guide, including this one. Simple Green's Industrial Cleaner & Degreaser product page lists heavy cleaning from full strength to 10 parts water, medium cleaning at 10 to 30 parts water, light cleaning at 30 or more parts water, and 20 to 30 parts water with mechanical assistance. Its Crystal vs. Heavy Duty Precision Cleaner comparison gives different ranges for each of those two products. Never carry a ratio from one product to another.
How to read a ratio
Simple Green's dilution FAQ states its convention: the first number is the cleaner and the second is the water. So 1:10 means 1 part cleaner plus 10 parts water, or 11 parts in total. Ratios in parts work with any measure, metric or imperial. Other manufacturers may express strength differently, for example as ounces per gallon, so confirm the convention on each label before you calculate.
The math, for a 1:N ratio (1 part cleaner to N parts water):
- Cleaner needed = final volume ÷ (N + 1)
- Water needed = cleaner × N
Worked examples:
- 1 litre at 1:10: 1,000 ÷ 11 ≈ 91 mL cleaner + about 909 mL water.
- 1 U.S. gallon (128 fl oz) at 1:10: 128 ÷ 11 ≈ 11.6 fl oz cleaner + about 116.4 fl oz water.
- 1 litre at 1:30: 1,000 ÷ 31 ≈ 32 mL cleaner + about 968 mL water.
- Scaling up: 5 gallons of concentrate at 1:10 takes 50 gallons of water and makes 55 gallons of solution.
A marked jug or pre-marked bottle beats estimating by eye.
A safe mixing routine
- Read first. Check the label and SDS, and wear the PPE that Section 8 and your hazard assessment require. Our companion guide on reading an SDS and choosing chemical PPE explains how.
- Use a clean, dedicated container. Never use food or drink containers. An empty dilution bottle keeps mixing consistent.
- Measure, then mix as the label directs, including the water temperature and the order of adding. Simple Green's product page specifies dilution with ambient water for that product.
- Label immediately. Add a secondary label with the product name and hazard information; noting the strength and date is good practice.
- One product per bottle. Never combine different cleaners or add other chemicals to "boost" a mix. Some combinations react and release harmful gases or heat.
- Finish safely. Wipe drips, store as SDS Section 7 directs, and dispose of leftovers per Section 13 and local requirements.


Matching strength to the job
Scrubbing, brushing or pressure washing can allow a weaker mix where the label supports it. Simple Green positions Crystal for routine soils and sensitive surfaces, and Heavy Duty Precision Cleaner for heavy, aged or oxidised buildup; treat that as a starting point, then follow each label.
When to stop
Stop and ask a supervisor if a container is unlabeled, the SDS is missing, the label is unreadable, or anyone feels unwell. Follow SDS Section 4 and your site first-aid arrangements, and get medical help.
Products in this guide
Find these in Janitorial & Industrial Supplies: Crystal Simple Green Industrial Cleaner and Degreaser, Simple Green Industrial Cleaner and Degreaser, Simple Green Heavy Duty Precision Cleaner, empty dilution bottles and secondary labels.
This guide is general information. It does not replace the product label, the current SDS, or advice from a qualified safety professional.

