Eagle 2 Multi Gas Detector (LEL, O2, H2S, CO, VOC & Toxics) by RKI Instruments
In stock
RKI Instruments Eagle 2 (722-001, LEL & ppm / O2) 6-gas sample-draw monitor: the solution for just about any portable gas monitoring situation, well beyond standard confined-space LEL, O2, H2S and CO protection.
Key benefits
- Monitors up to 6 gases; ppm, % LEL or % vol auto-ranging combustible detection
- Easy access to auto-calibration, alarm silence, demand zero, peak hold and methane elimination
- Two user-adjustable alarm levels per channel (latching or self-resetting) plus TWA and STEL for toxics
- Optional PID for low or high ppm VOCs (0–50 and 0–2,000 ppm) with Fence Electrode Technology
- Optional TC sensor for % vol CH4 and H2; IR sensors for CO2, CH4 and HC; H2-specific LEL/ppm sensor
- Smart plug-and-play toxic sensors: NH3, AsH3, Cl2, HCN, PH3, SO2
- Strong internal pump draws samples up to 125 ft, with low-flow shut-off and alarm
- Over 18 hours on alkaline or 20 hours on NiMH batteries
- Datalogging standard on all sensors
- Internal hydrophobic dust filter; external probe with hydrophobic filter
- Multilingual (5 languages); RFI/EMI, chemical and weather-resistant enclosure
- Intrinsically safe design, CSA approved
Typical applications
- Confined space entry
- EPA Method 21 fugitive emission monitoring of VOC leaks from process equipment
- Environmental applications (methane elimination)
- Tank testing with float probes
Specifications
| Enclosure | Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend. Can operate in 2.0” of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP64. |
| Dimensions | 9.5” L x 5.25” W x 5.875” H |
| Weight | 3.8 Lbs (standard 4 gas with batteries). |
| Detection Principle | Catalytic combustion, electrochemical cell, galvanic cell, infrared, Photoionization detector, and thermal conductivity. |
| Sampling Method | Powerful, long-life internal pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH. |
| Display | 3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand, with adjustable time. |
| Language | Readout can display in 5 languages (English, French, German, Italian, or Spanish). |
| Alarms | 2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable. |
| Alarm Method | Buzzer 95 dB at 30 cm, four high intensity LED’s. |
| Controls | 4 External glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features. |
| Continuous Operation | At 70°F, 18 hours using alkaline batteries, or 20 hours using NiMH. |
| Power Source | 4 alkaline or NiMH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines). |
| Operating Temp. & Humidity | -20°C to 50°C (-4°F to 122°F), 0 to 95% RH, non-condensing. |
| Environmental | IP-64 |
| Response Time | 30 Seconds to 90% (for most gases) using standard 5 ft hose. |
| Safety Rating | Intrinsically Safe, Class I, Groups A, B, C, D. Approvals: CSA / CE |
| Standard Accessories | Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter. |
| Optional Accessories | • Dilution fitting (50/50) • NiMH batteries • Battery charger, 115 VAC, 220 VAC, or 12 VDC (charge time 4 hours) • Continuous operation adapter, 115 VAC or 12 VDC • Extension hoses • IRDA cable for datalogging download |
| Warranty | Two year material and workmanship, one year for PID sensor. |
Product information supplied by the manufacturer (RKI Instruments).
Product codes
SKU: 722-001
Couldn't load pickup availability
Discuss your requirements with Russmill Safety: sales@russmillsafety.com.
Selection & specifications
Selection & specifications
Review the product description, available variants and manufacturer’s specifications before ordering. PPE must be selected for the hazards and requirements of your workplace.
Shipping & returns
Shipping & returns
Review our Shipping Policy and Refund Policy for current terms.
Care & product support
Care & product support
Follow the manufacturer’s care, inspection and replacement instructions. Need clarification? Contact customerservice@russmillsafety.com with the product name or SKU.
Available payment methods are displayed at checkout. Review your order and delivery details before completing payment.
Quick order list
Match equipment to your workplace hazards and the manufacturer’s published specifications. Check sizing, compatible components and intended use before ordering.
Read our Shipping Policy and Refund Policy. Contact our team about product and order requirements.
Send product names or SKUs, quantities, sizes and your destination to sales@russmillsafety.com to discuss your requirements.


