Beacon 110 Single Channel Wall Mount Controller by RKI Instruments
In stock
RKI Instruments Beacon 110 single-channel wall-mount controller (72-2110RK-02, small red light, no sensor): gas detection simplified, for one point of detection.
Key benefits
- Powerful, low-cost, microprocessor-controlled fixed system controller; simple to install and operate
- Accepts RKI LEL, O2, H2S or CO direct-connect sensors, or any 4-20 mA transmitter (2 or 3 wire, 24 VDC)
- Sensors mount at the housing or wire remotely; long-life sensors (2+ years typical)
- Two programmable alarm levels; audible alarm with reset button; built-in trouble alarm with relay
- 10 A form C relays directly power external alarms and horns
- Backlit digital display shows gas type and concentration; 4-20 mA output
- 115/220 VAC or 24 VDC operation
- Compact, weatherproof NEMA 4X enclosure; complies with lock-out/tag-out standards; external reset switch
- Ships with wall mounting kit
- Made in the USA
Specifications
Physical |
|
| Dimensions | Height: 8.5″ 216 mm Width 7.0″ 178 mm Depth 4.3″ 109 mm |
| Enclosure | Wall mounting grey polycarbonate with hinged cover. |
| Conduit Connection |
3/4″ NPT conduit hubs, 2 provided. 1 for sensor wiring 1 for power & relay wiring |
| Wiring Termination |
Screw type terminal block 14 gauge max. |
| Power | Universal 115 VAC & 220 VAC, or 24 VDC nominal, battery backup option available |
| Controls | 3 internal push buttons for setup, programming, and calibration. 1 external push button for alarm reset |
Environmental |
|
| Operating Temp | -4°F to 122°F (-20°C to 50°C) |
| Storage Temp | -4°F to 158°F (-20°C to 70°C) |
| Relative Humidity |
0 – 100% RH |
| Enclosure Rating |
NEMA-4X enclosure, waterproof, chemical, and weather resistant. |
Inputs |
|
| Direct Wired Sensors |
LEL Oxygen Carbon Monoxide Hydrogen Sulfide Remote amp not required for less than 500 feet. |
| 4-20 mA Sensors | Accepts any 4-20 mA transmitter (24 VDC, 2 or 3 wire). A wide variety of RKI/Riken sensors are available with 4-20 mA signals. (See list of detectable gases.) Wiring distances up to 5000 feet |
| Sampling Methods | Diffusion and sample draw heads available. |
Outputs |
|
| Relays | 3 relays – 10 amp rating (at 115 VAC), SPDT isolated contacts. 2 relays for gas alarms and 1 trouble relay. Relays fully programmable for: increasing or decreasing alarm, latching or self reset, normally energized or normally de-energized, time delay for alarm on and alarm off |
| 4-20 mA | Signal output, 4-20 mA (maximum load impedance 500 ohms), per channel |
| 24 VDC | 24 VDC (400 mA max) output provided to operate sample drawing adapters or other accessories |
| Display | 2 x 8 Alphanumeric display with backlighting. |
| Audible | Built-in audible alarm, 94 dB, mounted on enclosure Coded output: pulsing = gas alarm, steady = fail |
| Visual | 3 LED’s on the front cover for alarm status indication, and malfunction |
Warranty |
One year materials and workmanship |
| Partial List Of Detectable Gases Many other gases or ranges available. Contact RKI for gases or ranges not listed. | |
| Ammonia (NH3) | 0 – 75.0 ppm |
| Arsine (AsH3 ) | 0 – 0.20 ppm |
| Boron Trichloride (BCl3) | 0 – 15.0 ppm |
| Carbon Dioxide (CO2) | 0 – 1.0 % |
| Carbon Monoxide (CO) | 0 – 300 ppm |
| Chlorine (Cl2) | 0 – 3.0 ppm |
| Chlorine Dioxide (ClO2) | 0 – 1.00 ppm |
| Chlorine Trifluoride (ClF3) | 0 – 1.00 ppm |
| Combustibles | 0 -100% LEL |
| Diborane (B2H6) | 0 – 30.0 ppm |
| Fluorine (F2) | 0 – 6.0 ppm |
| Hydrogen (H2) | 0 – 2000 ppm |
| Hydrogen Chloride (HCl) | 0 – 15.0 ppm |
| Hydrogen Fluoride (HF) | 0 – 9.0 ppm |
| Hydrogen Sulfide (H2S) | 0 -100.0 ppm |
| Nitric Oxide (NO) | 0 -100.0 ppm |
| Nitrogen Dioxide (NO2) | 0 – 15.0 ppm |
| Nitrogen Trifluoride (NF3) | 0 – 30.0 ppm |
| Oxygen (O2) | 0 – 25.0 % |
| Ozone (O3) | 0 – 1.0 ppm |
| Phosphine (PH3) | 0 – 1.0 ppm |
| Silane (SiH4) | 0 – 15.0 ppm |
| Sulfur Dioxide (SO2) | 0 – 30.0 ppm |
| TEOS (Si(OC2H5)4) | 0 -15/30 ppm |
Specifications subject to change without notice.
Product information supplied by the manufacturer (RKI Instruments).
Product codes
SKU: 72-2110RK-02
Couldn't load pickup availability
Discuss your requirements with Russmill Safety: sales@russmillsafety.com.
Selection & specifications
Selection & specifications
Review the product description, available variants and manufacturer’s specifications before ordering. PPE must be selected for the hazards and requirements of your workplace.
Shipping & returns
Shipping & returns
Review our Shipping Policy and Refund Policy for current terms.
Care & product support
Care & product support
Follow the manufacturer’s care, inspection and replacement instructions. Need clarification? Contact customerservice@russmillsafety.com with the product name or SKU.
Available payment methods are displayed at checkout. Review your order and delivery details before completing payment.
Quick order list
Match equipment to your workplace hazards and the manufacturer’s published specifications. Check sizing, compatible components and intended use before ordering.
Read our Shipping Policy and Refund Policy. Contact our team about product and order requirements.
Send product names or SKUs, quantities, sizes and your destination to sales@russmillsafety.com to discuss your requirements.
