GX-2012 Confined Space Gas Monitor by RKI Instruments
In stock
RKI Instruments GX-2012 confined space gas monitor (72-0292-01-B: 1 sensor, LEL base, alkaline and Li-ion battery packs with 100–240 VAC charger): multiple tools in one instrument.
Key benefits
- 3 operating modes: Normal (confined space safety monitoring), Leak Check (leak investigation, with ppm leak detector and CO display) and Bar Hole (underground leak checks)
- Monitors ppm/% LEL, % volume methane, O2, CO and H2S; with optional TC sensor measures 0–100% volume methane and auto-ranges from % LEL to % volume, ideal for line purge testing
- RKI's smallest personal 1–5 sensor monitor with built-in sample pump (up to 50 ft); weighs only 12.3 oz
- Large LCD shows all gas readings, battery level and time; automatic backlight in alarm
- Vibration, visual and audible alarms, latching or non-latching; visual/audible pulses change with gas concentration
- Continuous self-checks for sensor connections, low battery, circuit trouble, low flow and calibration errors
- Interchangeable Li-ion or alkaline battery packs, replaced without tools
- Intrinsically safe, ATEX/IECEx/CE or CSA/CE (optional)
Specifications
| Gas Detected | Combustible Gases (Methane as standard) |
% Volume Methane |
Oxygen (O2) | Hydrogen Sulfide (H2S) | Carbon Monoxide (CO) |
| Detection Principle | Catalytic combustion | Thermal conductivity | Galvanic cell | Electrochemical cell | |
| Detection Range | 0 ~ 100% LEL 0 ~ 500 / 1,000 / 2,000 / 5,000 ppm |
0 ~ 100% Vol. | 0 ~ 40% Vol. | 0 ~ 100 ppm (optional 0-500 ppm) |
0 ~ 500 ppm |
| Accuracy Statement (whichever is greater) |
± 5% of reading or ± 2% LEL(LEL mode only) |
± 5% of reading or ± 2% of full scale | ± 0.5% O2 | ± 5% of reading or ± 2 ppm H2S | ± 5% of reading or ± 5 ppm CO |
| Sampling Method | Internal sample pump, flow rate nominal 0.5 LPM, includes hydrophobic filter | ||||
| Display | Digital LCD with 7 segments, auto backlight during alarm | ||||
| Preset Alarms (User Adjustable) |
1st alarm 10% LEL 2nd alarm 50% LEL Over alarm 100% LEL |
No alarms for % Vol. CH4 |
Low alarm 19.5% High alarm 23.5% Over alarm 40.0% | 1st 5 ppm 2nd 30 ppm TWA 10 ppm STEL 15 ppm Over 100 ppm |
1st 25 ppm 2nd 50 ppm TWA 25 ppm STEL 200 ppm Over 500 ppm |
| Alarms Types | Gas alarms: 1st and 2nd, STEL, TWA (user adjustable) and OVER Trouble alarms: Sensor connection, low battery, low flow, circuit trouble and calibration error |
||||
| Alarm Methods | Gas alarms: Flashing lights, two tone buzzer, and vibration Trouble alarms: Flashing lights, trouble displayed, intermittent buzzer, and vibration |
||||
| Operating Temp. & Humidity | -20°C to +50°C (-4°F to 122°F) 0 to 95% RH, non-condensing |
||||
| Response Time | Within 30 seconds (T90) | ||||
| Continuous Operation | Alkaline battery: 15 hours Li-Ion battery: 10 hours 70°F (21°C) |
||||
| Power Source | Li-Ion battery pack, or 3 “AA” Alkaline battery pack; interchangeable | ||||
| Safety Rating | ATEX, TIIS, IECEx, CE, CSA classified (as standard), as intrinsically safe. Class I, Division 1, Groups A, B, C, D (optional version available) | ||||
| Dimension & Weight | Approx. 143 (H) x 71 (W) x 43 (D) mm (5.6” H x 2.8” W x 1.6” D), approx. 350 g (12.3 ounces) | ||||
| Case Material | High dust & water resistant design. RFI shielded high impact plastic with protective rubber overmolding | ||||
| Controls | Five buttons: POWER / ENTER, DISPLAY, AIR, RESET, SHIFT | ||||
| Standard Accessories |
|
||||
| Optional Accessories |
|
||||
| Configurations | 1, 2, 3, 4, or 5 sensor units Li-Ion or alkaline battery pack options |
||||
| Warranty | Two years material and workmanship | ||||
Product information supplied by the manufacturer (RKI Instruments).
Product codes
SKU: 72-0292-01-B
Couldn't load pickup availability
Discuss your requirements with Russmill Safety: sales@russmillsafety.com.
Selection & specifications
Selection & specifications
Review the product description, available variants and manufacturer’s specifications before ordering. PPE must be selected for the hazards and requirements of your workplace.
Shipping & returns
Shipping & returns
Review our Shipping Policy and Refund Policy for current terms.
Care & product support
Care & product support
Follow the manufacturer’s care, inspection and replacement instructions. Need clarification? Contact customerservice@russmillsafety.com with the product name or SKU.
Available payment methods are displayed at checkout. Review your order and delivery details before completing payment.
Quick order list
Match equipment to your workplace hazards and the manufacturer’s published specifications. Check sizing, compatible components and intended use before ordering.
Read our Shipping Policy and Refund Policy. Contact our team about product and order requirements.
Send product names or SKUs, quantities, sizes and your destination to sales@russmillsafety.com to discuss your requirements.

