Smallest Gas Monitor - GasWatch 3 by RKI Instruments
In stock
RKI Instruments GasWatch 3: the world's smallest and lightest single-gas monitor, weighing just 1.6 oz, worn on the wrist or clipped into your breathing zone.
Versions: O2 - Galvanic sensor with alligator clip, H2S with alligator clip, CO - electrochemical sensor with alligator clip, CO with H2 compensated sensor and alligator clip, CO / O2 combination with alligator clip.
Key benefits
- 5 versions: O2 [GW-3(O2)], CO [GW-3(CO)], H2S [GW-3(H2S)], H2-compensated CO [GW-3(C-)] for steel mills, refineries and other hydrogen environments, and dual CO/O2 [GW-3(CX)]
- Field-replaceable coin-type lithium battery: over 4,000 hours continuous operation (H2-compensated CO up to 2,500 h; CO/O2 up to 2,000 h)
- 3-year warranty* (2 years for O2 sensor)
- Light, compact watch-type design; watch band, clip-on or alligator clip with 360° rotation
- Automatic backlight during alarm
- Sturdy IP-66/68 design: water, dust and RF resistant
- Non-compliance indicator
Specifications
| Model | GW-3 (HS) Hydrogen Sulfide |
GW-3 (CO) Carbon Monoxide |
GW-3 (C-) H2 Compensated CO |
GW-3 (CX) (Dual Sensor) | GX-3 (O2) Oxygen |
|
| Carbon Monoxide | Oxygen | |||||
| Detection Principle |
EC | Dual EC | Galvanic Cell | |||
| Detection Range (Increments) |
0 ~ 30 ppm (0.1) 30 ~ 100 ppm (1) |
0 ~ 300 ppm (1) | 0 ~ 25.0% Vol. (0.1) | |||
| Service Range | 100 ~ 200 ppm (1) | 310 ~ 2,000 ppm (10) | 25 ~ 40.0% Vol. (0.1) | |||
| Alarm Setpoints | 1st: 5.0 ppm 2nd: 30.0 ppm 3rd: 100.0 ppm TWA: 1.0 ppm STEL: 5.0 ppm OVER: 200.0 ppm |
1st: 25 ppm 2nd: 50 ppm 3rd: 1200 ppm TWA: 25 ppm STEL: 200 ppm OVER: 2,000 ppm |
L: 19.5% Vol. LL: 18.0% Vol. H: 23.5% Vol. OVER: 40.0% Vol. |
|||
| Operating Temperature | -20 °C to +50 °C (no sudden changes) (Approx. 15-minute temporary use environment: -20 °C to +60 °C) [no sudden changes] |
-20 °C to +50 °C (no sudden changes) |
||||
| Humidity Range | 10 to 90 %RH (no condensation) (Approx. 15-minute temporary use environment: 0 to 95 %RH) [no condensation] |
10 to 90 %RH (no condensation) |
||||
| Continuous Operating Time |
Approx. 4,000 hours | Approx. 2,500 hours | Approx. 2,000 hours | Approx. 4,000 hours | ||
| Sampling Method | Diffusion Type | |||||
| Types of Alarm | Gas alarms: Three-step alarms, STEL alarm, TWA alarm, OVER alarm Fault alarms: Sensor connection / disconnection, low battery level, calibration failure, clock abnormality, system abnormality | |||||
| Alarm Indications | Auto-reset or self latching Lamp flashing, intermittent buzzer sounding, gas concentration readout blinking, vibration | |||||
| Power Source | CR2450 coin-type lithium ion battery | |||||
| Case Material | Intrisically safe explosion-proof construction (Ex ia IIC T4 Ga) , IP 66/68 (6.6ft, 1h) (2m, 1h) | |||||
| Approvals | ATEX, IECEx, CSA | |||||
| Dimension & Weight | 2.5″ W x 1.6″ H x .86″ D (Approx 63 mm W x 42mm H x 22mm D) , 1.6 ounces (approx. 45g) | |||||
| Functions | Data logger, vibration, STEL alarm, TWA alarm, quick calibration, peak value display, temperature display | |||||
| Standard Accessories |
CR2450 coin-type lithium-ion battery, Spring pins (used to mount accessories on to the rear face), Watch band, Alligator clip |
|||||
| Optional Accessories |
Heat-resistant case, Dust filter, CF-1821 filter (for CO sensor), CF-A13i-1 humidity control filter (for H2S sensor), Calibration adapter | |||||
Product information supplied by the manufacturer (RKI Instruments).
Product codes
- O2 - Galvanic sensor with alligator clip — SKU: 72-0012
- H2S with alligator clip — SKU: 72-0022
- CO - electrochemical sensor with alligator clip — SKU: 72-0023
- CO with H2 compensated sensor and alligator clip — SKU: 72-0025
- CO / O2 combination with alligator clip — SKU: 72-0026
Couldn't load pickup availability
Discuss your requirements with Russmill Safety: sales@russmillsafety.com.
Selection & specifications
Selection & specifications
Review the product description, available variants and manufacturer’s specifications before ordering. PPE must be selected for the hazards and requirements of your workplace.
Shipping & returns
Shipping & returns
Review our Shipping Policy and Refund Policy for current terms.
Care & product support
Care & product support
Follow the manufacturer’s care, inspection and replacement instructions. Need clarification? Contact customerservice@russmillsafety.com with the product name or SKU.
Available payment methods are displayed at checkout. Review your order and delivery details before completing payment.
Quick order list
Match equipment to your workplace hazards and the manufacturer’s published specifications. Check sizing, compatible components and intended use before ordering.
Read our Shipping Policy and Refund Policy. Contact our team about product and order requirements.
Send product names or SKUs, quantities, sizes and your destination to sales@russmillsafety.com to discuss your requirements.

